Category Archives: PG

1/60 PG Unicorn part 6

Gallery May 17, 2015 GN 5 Comments

The head turned out to be a little harder to assemble than I'd have liked, but the real key is to read through the steps of the instructions very very carefully and don't miss steps. Also, I'd advise leaving the back plate off until the end as otherwise it's easy to scratch and mark. I … Continue Reading ››

PG, Work In Progress

1/60 PG Unicorn part 5

Gallery May 16, 2015 GN Leave a comment

The arms on the Unicorn turned out to be rather more complex and involved than I thought they'd be. As with the rest of the kit I've used extensive masking to put detail onto the armour and to follow through the colour scheme I've established with the body and legs.

PG, Work In Progress

1/60 PG Unicorn part 4

Gallery May 9, 2015 GN 8 Comments

The legs of the Unicorn are highly complex and full of detail.

These flaps open up on the transform and allow you to see their insides, so I used some of the Createx fluorescent green which may just light up nice with the UV LEDs. Continue Reading ››

PG, Work In Progress

1/60 PG Unicorn part 3

Gallery May 3, 2015 GN 4 Comments

As you can guess I've been busy which is why I've not update the blog recently for the PG Unicorn build. I'm remedying that now with a comprehensive build update!

First off, I was impressed with the size of the complete Unicorn feet so brought the PG … Continue Reading ››

PG, Work In Progress

1/60 PG Unicorn part 2

Gallery April 19, 2015 GN 1 Comment

The last few weeks have been busy here, so little time for Unicorn. I just got back from a week visiting a trade show (NAB in Las Vegas), so I'm posting a quick photo update on the build.

Now that winter is over, spring is bringing bright … Continue Reading ››

PG, Work In Progress

1/60 PG Unicorn part 1

Gallery April 10, 2015 GN Leave a comment

I bought the Unicorn PG as soon as it came out, along with the LED set, and I've been aching to get started on it, but because I'd already built the MG Unicorn, I wanted to think on how best to paint the PG version.

As I'd … Continue Reading ››

MG, PG, Thoughts

Size Comparison

Gallery March 3, 2014 GN Leave a comment

The Sazabi is a pretty large 1/100 MG kit. But how big is it?

Next to the 1/60 PG Astray Red Frame, it stands up pretty good, especially in the bulkier transformed mode, and the shield is large enough to almost make the Astray envious.Continue Reading ››

Completed Builds, PG

PG Char’s Zaku II

Gallery June 18, 2013 GN 1 Comment

Ok, yes, you've guessed it, I'm happy! Although rather tricky to put the armour on, the end result is looking superb.

PG, Work In Progress

PG Char’s Zaku II part 10 – Frame

Gallery June 17, 2013 GN 2 Comments

I completed the frame and did an assembly. This kit has perhaps the most impressive inner frame of PG Gundams that I've built so far. There's an immense amount of detail and good articulation. The only negative aspect are the feet which are lightweight and don't have the strength or detail of the rest of … Continue Reading ››

PG, Work In Progress

PG Char’s Zaku II part 9

Gallery June 15, 2013 GN 3 Comments

With the major painting complete (just really doing touch-ups, or adding detail as I see where the pieces go when assembled), progress is good, although slower than with other kits due to the complexity, the screws and the sheer number of parts on the internal skeleton.

These … Continue Reading ››

GN Particles

Category Archives: PG

1/60 PG Unicorn part 6

1/60 PG Unicorn part 5

1/60 PG Unicorn part 4

1/60 PG Unicorn part 3

1/60 PG Unicorn part 2

1/60 PG Unicorn part 1

Size Comparison

PG Char’s Zaku II

PG Char’s Zaku II part 10 – Frame

PG Char’s Zaku II part 9

Adventures in Plamo